Laptops and batteries rarely fail all at once.
The more likely scenario is that it gradually drains your battery or does not charge the battery. The following article will show you how to charge and restore your laptop battery.
This step-by-step guide shows you step by step how to repair a broken laptop charger port. This will allow you to charge your computer, laptop, or notebook.
How Can You Charge Your Laptop With A Broken Charger Port?
Contents
External damage is the most common cause for these ports to malfunction.
A hard hit on the side of your laptop, or a misplaced item can make your port break. The port is likely to get damaged if it is a component that is commonly used.
If you had the pin inserted and the charger port still malfunctioned, it is probable that a conductive substance was pressed against the port.
This substance could have damaged the port. Next time, you should exercise extreme caution before inserting the pin, so as to avoid potentially damaging the port.
A damaged port may also occur if your laptop is dropped or falls from high heights. Cell phones are the most common items to be dropped on laptops.
The point is that there is usually an external cause for the damage that isn’t your fault.
However, these ports are fragile, so it is possible for your charger port to malfunction even if you are careful with your laptop.
Separately Charge The Battery
In this circumstance, the first thing you need to do is take out the battery from your laptop. Take the batteries out of the battery compartment and screw the compartment shut. Next, use a charger to juice up your laptop battery.
There are two methods to achieve maximum battery life through charging.
The first method is to leave your laptop plugged into the charger, no matter what. The second method is to charge the battery in your laptop and unplug it with a charger cable.
A charging dock is a gadget that contains a power cord, a USB charger port, and a cable for connecting the charger port to your laptop.
This charger works much the same way. It’s best to recharge your laptop’s battery when it’s completely drained.
However, if you have time, and your laptop is still partially charged, you can charge it when it’s not completely drained.
You may have seen a rounded plastic piece with a plug on one end.
You can plug that plastic piece into an outlet and then plug the battery into the plastic piece. It charges the battery.
If your laptop does not have such a piece, you can use a USB cable to do the same thing. Simply plug the USB cable into the port on your laptop and then plug the other end of the cable into a USB port.
Even though doing so is inconvenient, it is a cheaper option. Using one of those wire charging blocks is also an option.
Just make sure you use the correct type of adapter. The first type uses a single USB outlet, while the second type uses three.
The USB “A” outlet will accept either type. If you have an “M” port, use an adapter for two USB outlets.
If you have an adjustable port, use an adapter for one USB outlet and one AC outlet.
Use Type-C Slot
It’s possible that the Type-C port is not part of the new laptop design, so you’ll need to purchase one separately.
If that’s the case, this remedy is pointless. However, if you realize that your laptop won’t start up when you use a charger, then this approach might work for you.
This solution is for laptops that break down and no longer have a charging port. The Type-C port is completely compatible with the charger that comes with it.
Because the Type-C port is not the primary charging port, it is important that the slot is compatible with the voltage and wattage required by your laptop.
It’s important to remember that every laptop model has different requirements to be charged.
A charger that fits the slot but doesn’t produce the correct voltage or wattage might cause the machine to malfunction or even put itself in danger. The first step is to unplug your charger from the outlet.
Leave the cable plugged into the charging port. Next, determine which way the Type-C connector should face when you connect the charger to your laptop.
Once you’ve got them, you’ll need to get a cable for the Type-C connector. The cable needs to be long enough to reach from the connector to your laptop’s charging port.
You also need a power adapter. The power adapter serves as the power source for the charger.
Make sure that the adapter is rated high enough to provide enough power for your laptop. Your laptop should be able recharge itself if you use the correct charger.
Get The Slot Fixed
For a long-term solution, you should try to have your slot fixed.
It shouldn’t be too tough, but you will need to be careful when working inside the laptop. You can damage the circuit boards if you aren’t careful.
You’ll have a greater chance of saving a lot of money if you do it yourself.
If it’s an older model, you may not have as many replacement parts, meaning you may need to buy a new part and install it. Either way, it’s a lot cheaper than buying a new laptop.
If you’ve worked with computers previously and aren’t afraid of taking apart your laptop, you might be able to replace the slot on your own.
Ensure you’ve read through all of the instructions to make sure that you understand how to safely disassemble your laptop.
Also Read: Should You Charge Your Laptop Before First Use?
Conclusion
There are a few temporary repairs you could potentially carry out to fix the damaged charging port.
The first option is to remove the battery from your device for separate charging. This is an unusual but temporary solution since doing so will cause your battery to discharge faster.
If your battery is relatively new, you may not need to replace it. It’s not recommended to use an adapter to charge your device since the port may be damaged even more.
If such damage is irreparable, you may need to purchase a new one.
The first thing you may do is to try to extract the remaining parts of the charging port from your device.
The second option is to use the Type-C port on your device.
This is, however, a rare and unusual feature, since USB Type-C charging ports are normally seen on newer devices. Getting the charging slot repaired is the only way to achieve a long-term solution.
If you know what you’re doing, you can either do this yourself or take it to a repair shop.
However, since a charged USB Type-C port is more delicate than a standard port, it is a better idea to take it to a professional.
If you want a long-term solution, then make sure you take it to an Apple Store or a reputable repair shop that specialized in charging ports.
If you know what you’re doing, you can save some money by repairing the charging port on your own.
